PING Goes Adjustable

With golf season in full swing it might seem like a strange time to be introducing a wide -ranging product line but the engineers at PING Golf have been very busy of late and the company is ready to reveal their efforts.

PHOENIX (July 25, 2012) — Building on its reputation for innovation and performance, PING introduced several new products today, including the Anser® adjustable driver, which is offered in four high-performance shafts, the new Tour wedge with Gorge Groove Technology, and the Serene family, specifically engineered for women golfers. All the new products will be available in golf shops later this summer and fall.

“Our newest products continue our emphasis on custom-engineering — designing technology that meets the needs of distinct player profiles,” said John A. Solheim, PING Chairman & CEO. “Through extensive research and analysis, which includes player testing of every skill level, both men and women, we’ve advanced performance in several categories. For example, in the Anser driver, we added an adjustable hosel without adversely affecting the weighting properties that are so critical to overall performance. Our new Serene driver features a high-balance-point shaft, which allowed us to lengthen the shaft ½ inch while maintaining the same overall weight so women can swing a longer club to generate more distance. It’s these types of improvements that continually lead to lower scores and more enjoyment for golfers.”

New products include the Anser® line, which features adjustable drivers and fairway woods, a traditionally shaped hybrid and a forged, multi-material iron; Tour wedges with Gorge Groove Technology; the Serene women’s family of drivers, fairway woods, blended iron/hybrid sets and putters; and the Nome® 500 long putter with an adjustable shaft.

Trajectory Optimization

The Anser adjustable driver enables golfers to fine-tune trajectory through a combination of loft adjustment and shaft selection. Players can add or subtract ½ degree of loft and also choose one of four high-performance shafts to perfectly fit their swing — a process PING calls Trajectory TuningTechnology. The shafts are the PING TFC 800D, Aldila Phenom®, Fujikura Blur Red, and the Mitsubishi Diamana® ‘ahina®. They vary in weight, stiffness profile, and the trajectory they deliver.

“Shaft fitting is a very important step in optimizing trajectory so golfers can benefit from greater distance and accuracy,” Solheim said. “It was important that we have a range of high- performance shafts to match distinct player profiles. When combined with the loft adjustability, golfers will see significant improvement in their performance by adjusting their driver to suit the weather, course conditions or changes in their swings. A PING Certified Clubfitter will help determine the best shaft option based on how a player loads the club, their timing, and swing speed.”

Performance-Engineered Hosel

Solheim said PING also advanced adjustability in its Anser driver and fairway woods by engineering its adjustable-hosel technology to be lightweight and sleek so it wouldn’t compromise performance.

“Most adjustable hosels are large and heavy, which takes weight away from more important areas of the clubhead,” he said. “Our adjustable hosel is the same diameter and mass as our traditional fixed hosel. We saved weight through its sleek design and by using a lightweight

titanium screw and an aluminum hosel sleeve. Looking down at the club from the address position, there’s a seamless transition from the shaft to the head.”

The Anser driver is available in 8.5º, 9.5º, 10.5º and 12º lofts. The Anser fairway woods are offered in a 3-wood (14.5º), 4-wood (16.5º), and 5-wood (18.5º). Each is adjusted using a PING torque wrench, which loosens the clubhead so golfers can set the loft to the desired position. In addition to changing loft, adjusting the hosel position allows a player to adjust the set-up face angle to his or her preference. Adjusting the hosel to the (+) position adds loft and closes the face, while the (–) position decreases loft and opens the face.

Gorge Grooves in the Tour wedge

PING’s new Tour wedge features an innovation called Gorge Groove Technology, designed to maximize spin and control. The grooves are precision-milled at the company’s Phoenix plant, allowing the company’s machinists to hold very tight tolerances and to monitor every groove variable: top-edge radius, width, depth, spacing, and wall angle. “We believe this to be the best-performing groove design in the industry. By taking the unprecedented step of bringing the groove milling process entirely in-house, we’re able to ensure the highest quality and performance.  Players are going to be excited when they see how much control and consistency they have with the Tour wedge,” Solheim said.

Tour wedges are available in three sole widths to accommodate different swing styles and playing conditions: the WS (Wide Sole); the TS (Thin Sole), and the SS (Standard Sole). “This is another opportunity to help the golfer find the wedge that fits their game based on their angle of attack and the course conditions they play most often. Each of the options allows the golfer to open up the face and play any type of shot they want in a given situation.”

Adjustable Belly and Long Putter Shafts

Adjustability isn’t limited to the Anser driver and fairway woods. Earlier this year, PING was the first major golf company to introduce a USGA/R&A-conforming adjustable-length belly shaft with the Nome® 405 putter. Since then, it has added an adjustable-length long putter shaft with the Nome 500 putter. “We saw an opportunity to expand on adjustability into the belly and long putter categories because getting the proper length in those types of putters varies greatly. The technology is easy to use and golfers can quickly modify the length of their putter to fit their body type, posture, and putting stroke,” said Solheim.

New-product descriptions and technical specifications:

Anser® Adjustable Driver

The Anser adjustable driver enables golfers to fine-tune trajectory through a combination of loft adjustment and shaft selection. Players can add or subtract ½ degree of loft and also choose one of four high-performance shafts to fit their swing profile — a process called Trajectory TuningTechnology. The shafts are the PING TFC 800D, Aldila Phenom, Fujikura Blur Red, and the Mitsubishi Diamana ‘ahina. They vary in weight, stiffness profile, and the trajectory they deliver. A PING torque wrench is used to add or subtract 1/2° of loft beyond the standard settings of 8.5°, 9.5°, 10.5°, and 12°. The adjustable hosel is lightweight and small in diameter to maintain the size and look of PING’s traditional fixed hosel. With its low-spin head, the Anser driver represents a fully optimized design solution that generates ideal trajectories for maximizing distance and accuracy. A straight-bias head rotation promotes square impact, and its low-spin design minimizes sidespin for improved accuracy. The 460cc head is made of Ti 8-1-1, a light, low-density alloy, and has a non-glare matte-black finish.

– Drivers available in 8.5º, 9.5º, 10.5º, and 12º with plus or minus ½ degree of loft adjustment.

Shaft options:

– TFC 800D graphite shaft (Soft R, R, S and X)

– Aldila Phenom 50 graphite shaft (R, S)

– Fujikura Blur Red 005 graphite shaft (R, S & X)

– Mitsubishi Diamana ‘ahina 70 graphite shaft (S, X)

Anser® Adjustable Fairway Woods

The Anser adjustable fairway wood features Trajectory Tuning Technology for adding or subtracting ½ degree of loft to the standard setting. To maximize distance and accuracy, the 17-4 stainless steel head has more surface area low on the clubface to make sure the ball contacts the club properly on the face. A rear sole weight optimizes the CG to promote a slightly lower, more penetrating ball flight with low spin, which adds distance and elevates the MOI across the face. The back of the sole is tapered to provide extra relief and ensure clean contact, even from tight lies, uneven lies, and light rough. A traditional shape and a straight lead edge inspire confidence and make aiming easy. A dark non-glare, matte finish reduces distractions.

– Fairway woods available: 3-wood (14.5º), 4-wood (16.5º), and 5-wood (18.5º) with plus or minus ½ degree of loft adjustment

– Shaft: TFC 800F graphite (Soft R, R, S, X)


Anser® Hybrids

Progressive CG locations in the 17-4 stainless steel Anser hybrids promote high launch and improved accuracy so players of all abilities can gain added distance and control. Through internal and external weighting, CG positions vary in the four loft options to produce the desired trajectory for extra distance and improved accuracy. In the lower-lofted hybrids, the CG is slightly lower and farther back for higher launch and optimal spin. The higher-lofted hybrids have a more forward CG position to optimize launch conditions. The traditionally shaped head is larger to increase MOI and inspire confidence. The lowest portion of the clubface is wider, most importantly in the heel and toe, for improved alignment and to ensure clean contact for more forgiveness and optimal spin. A dark, non-glare, matte finish eliminates distractions.

– Hybrids available: 17°, 20°, 23°, and 27°.

– Shaft: TFC 800H graphite (Soft R, R, S, X)

Anser® Forged Irons

An 8620 steel body combines with a dense tungsten weight and internal cavity above the sole positioned close to the face to optimize the CG and elevate MOI. Predictable ball flights are achieved through progressive stabilizing bar technology. In the long irons, the bars angle out wider and are thinner, lowering the CG to launch the ball high. The bars get increasingly vertical and thicker through the shorter irons for more controlled, penetrating trajectories with high spin. A progressive set design makes it easy to launch the ball higher with the long irons and lower with the short irons for precise, consistent shot making. Larger long irons promote forgiveness and higher launch; heads progress to smaller short irons for more control. Machined face and grooves.

-Shaft options: Project X (5.0, 5.5, 6.0, 6.5) or TFC 800i (Soft R, R, and S)

– Irons available: 3-PW


Tour Wedges

GorgeGroove Technology and multiple sole-width options maximize control and consistency. The grooves are milled at PING’s facility in Phoenix, Arizona, to hold extremely tight tolerances that ensure a groove size and shape that provides golfers maximum spin. The 17-4 stainless steel wedges are available in three sole widths: thin sole (TS), for tight lies, firm conditions and shallower swings; wide sole (WS), for soft conditions, from bunkers, and steeper angle of attack, and the standard sole (SS), for most turf conditions. All three sole options offer the versatility to open or close the clubface to play most any shot. The traditional head shape features a custom tuning port in the cavity, which increases MOI and contributes to a solid feel across the clubface.

-Wedges available: 47º (SS), 50º (SS), 52º (SS), 54º (SS, WS), 56º (SS, WS), 58º (SS, WS, TS), and 60º (SS, WS, TS).

-Steel shaft: CFS (Soft R, R, S, and X)

-Graphite shaft: TFC 169i (L, Soft R, R and S)


Serene Women’s Driver

The Serene driver’s large, forgiving head, expansive hitting surface, and high-balance-point shaft (lengthened ½” to 45” as standard) offer women longer, more accurate tee shots. Ultra-thin-crown technology in the wide-profile 460cc head utilizes Ti 3-1-1-1 to create discretionary weight that was used to optimize the CG and elevate forgiveness. The lowest portion of the clubface is wide to ensure solid contact and maintain distance and accuracy, even on mis-hits. Two PING ULT 210D high-balance-point shafts, a Lite and Ultra Lite, have a CG closer to the grip end, allowing the golfer to swing a clubhead with more mass at the same speed, generating faster ball speeds and longer tee shots. Using a high-balance-point shaft allowed the shaft to be lengthened, without increasing swing weight, for added distance.


– Drivers available: 10.5°, 12° and 14°

– Shaft options: PING ULT 210D Ladies graphite, Lite (49g), Ultra Lite (42g)


Serene Women’s Fairway Woods

With the optimized CG and spin rate provided by the Serene 17-4 stainless steel fairway woods, women will be more confident – and longer – off the tee and off the ground. An external weight pad in the wide-profile head positions the CG back and slightly lower to produce high launch and increase the MOI in both axes. Keeping the CG from being too low helps produce moderate spin, which increases carry distance and roll for slower swing speeds. The clubface is slightly shallower to inspire confidence at address, and additional hitting surface low in the face ensures the ball will launch cleanly from a variety of lies.



Serene Fairway Woods

– Fairway woods available: 3-wood (18°), 5-wood (22°), and 7-wood (26°)

– Shaft options: PING ULT 210F Ladies graphite, Lite (47g), Ultra Lite (40g)


Serene Women’s Irons/Hybrids

In the Serene iron/hybrid sets, women can blend 4H (22°), 5H (26°) and 6H (30°) hybrids with perimeter-weighted 17-4 stainless steel irons to launch the ball higher for longer results throughout the set while ensuring optimal distance gaps. In the irons, a deep CG and perimeter weighting increase the launch angle and elevate the MOI. The iron’s wide sole carves easily through the grass to launch the ball high and straight, even from the toughest lies. The traditionally shaped hybrids are larger and the CG is back and lower to achieve high launch with moderate spin to maximize distance in slower swing speeds. Camber and sole relief ensure playability from all lies.

– Irons/hybrids available: 5-9, PW, SW & LW

– Shaft options: PING ULT 210i Ladies graphite, Lite (51g), Ultra Lite (44g)

– Hybrids sold separately: 4H, 5H & 6H

– Shaft options: PING ULT 210H Ladies graphite, Lite (58g), Ultra Lite (50g)

Serene Women’s Putters

The Serene putters feature variable-depth groove technology. PING’s extensive studies show a significant increase in ball-speed consistency when measured at nine points across the face insert. The grooves are deepest in the center and get gradually shallower out to the perimeter of the insert to ensure predictable distances and accuracy, even when the ball is struck toward the heel or toe. The insert is made of 6061-T6 aluminum to provide a crisp feel and sound similar to a traditional steel face. Perimeter weighting in the 17-4 stainless steel heads and a well-balanced geometry add to forgiveness.

Available in Anser 2 (Slight Arc), B60 (Slight Arc), Shea® (Slight Arc) and Craz-E Too® (Straight) models.

Nome® 500 Long Putter

The Nome 500-gram Long Putter features an adjustable shaft that allows the golfer to modify the length from 44.5” to 54.5” using a PING wrench. The USGA/R&A-conforming telescoping shaft consists of a steel lower portion, a graphite grip portion and lightweight stainless steel locking ring. By unlocking the shaft, golfers can optimize length to fit their body characteristics, stroke type, and posture. A black alignment bar and white contrasting sightline on the head make aiming easy. The Nome putter is face-balanced and fits golfers who have a Straight putting stroke. It is precision-milled from high-grade aircraft aluminum and finished with a durable nano-nickel coating. The lightweight frame features tungsten sole weighting to optimize the CG and elevate the MOI.

-Long putter telescoping shaft self-adjusts from 44.5 to 54.5 inches

-WINN® AVS 2-Piece grip standard